Pepperl+Fuchs HD2-DM-A Manual page 84

Advanced Diagnostics
FDS/OPC Integration
3.
Select the Field Devices tab.
4.
Choose Add new Field Device in the configured field devices section.
Figure 5.52
The new field device is located in the configured field devices list.
5.
Choose Apply.
Removing a Field Device
In order to remove a field device, proceed as follows:
1.
Right-click the Advanced Diagnostic Module in the project section and choose Additional
Functions > Advanced Parameterization.
The advanced parameterization window appears.
2.
Select the segment in the Device Navigation section.
The segment window appears.
3.
Select the Field Devices tab.
4.
Mark the field device you want to remove in the Configured Field Devices section.
5.
Choose Remove selected Field Device.
The selected field device is removed from the configured field devices list.
6.
Choose Apply.
Remove all Inactive Field Devices
To remove all inactive field devices, proceed as follows:
1.
Right-click the Advanced Diagnostic Module in the project section and choose Additional
Functions > Advanced Parameterization.
The advanced parameterization window appears.
2.
Select the segment in the Device Navigation section.
The segment window appears.
3.
Select the Field Devices tab.
4.
Choose Remove all inactive Field Devices in the configured field devices section.
All inactive field devices are removed from the configured field devices list.
5.
Choose Apply.
84
Configured field devices section