Pepperl+Fuchs HD2-DM-A Manual page 106

Advanced Diagnostics
FOUNDATION Fieldbus Integration
6.8 HD2-GT-2AD.FF.IO Device Type Manager (DTM)
The DTM provides the following functions:
Online parameterization
See chapter 6.8.1
Commissioning wizard
See chapter 6.8.2
Diagnostics
See chapter 6.8.3
Measured values
See chapter 6.8.4
Snapshot explorer
See chapter 6.8.7
Parameterization
See chapter 6.8.1
History export
See chapter 6.8.6
Fieldbus oscilloscope
See chapter 6.8.8
Tag import wizard
See chapter 6.8.9
Reporting wizard
See chapter 6.8.10
6.8.1 Online Parameterization and Parameterization
The online parameterization and parameterization provide detailed access to all settings of the
FF diagnostic gateway. It is typically used for detailed tuning of the ADM functionality, configu-
ration of the I/O functionality and access to the resource and function blocks. For easy and fast
configuration of the ADM functionality, it is recommended to use more advanced tools such as
the commissioning wizard.
On the initial page, the online parameterization shows an overview of all function blocks.
106
This interface enables detailed access to all possible settings
of the HD2-DM-A. It is for advanced parameterization and can
be used to adjust the HD2-DM-A to some more seldom use
cases not covered by the automatic tools like the commission-
ing wizard.
The commissioning wizard is a tool for fast and easy system
setup with ADM. It guides you through the entire setup pro-
cess with system and segment calculation.
The diagnostics function displays all alarms that have
occurred at a glance.
This function enables fast validation of a new or reworked
fieldbus installation. It displays a qualitative rating of the rele-
vant segment and field device data. In order to save the results
as a report, this function enables you to create a snapshot of
the measured values.
The snapshot explorer simplifies administration and enables
printing of existing snapshots and reports.
This is an offline interface, which means that you can change
these settings without having a direct connection to the diag-
nostic device. This interface enables you to define the power
supply, the alarm settings, and the field devices per segment.
Allows exporting the history data automatically record by the
HD2–DM–A.
The fieldbus oscilloscope is the perfect tool for in-depth analy-
sis of the fieldbus signal.
This wizard provides the option to import segment and device
tags from the PCS to the DGW-FF.
Generates overview Reports for all segments connected to the
diagnostic gateway.