Pepperl+Fuchs HD2-DM-A Manual page 104

Advanced Diagnostics
FOUNDATION Fieldbus Integration
4.
In order to install the Microsoft
dialog.
5.
In order to install PACTware
6.
In order to install the FieldConnex DGW-FF DTMs, follow the instructions of the installation
dialog.
7.
After the selected components have been installed, choose Quit to leave the installation
wizard.
The DGW-FF DTMs and PACTware
8.
Run the FieldConnex diagnostic gateway DTM.
9.
Choose View > Device catalog.
10.
Choose Update device catalog in the device catalog section.
Figure 6.1
11.
Choose Yes to create a new PACTware
12.
Choose OK.
13.
Choose File > Exit to quit PACTware
PACTware
Licensing
In order to activate the full-featured version, a license key is needed. The license key is printed
on the license certificate you have optionally received with the FieldConnex diagnostic man-
ager software package. If you have downloaded the FieldConnex diagnostic manager from the
internet, a license key can be ordered through your local Pepperl+Fuchs representative.
Note
Upgrade Information
After upgrading from diagnostic manager version 1.x to version 2.x, activate the new version
with the upgrade license key. After complete reinstallation of the diagnostic manager, e.g., the
installation on a new PC, enter both license keys from version 1.x and 2.x, one after the other,
into the license activation tool.
104
®
.NET framework, follow the instructions of the installation
TM
, follow the instructions of the installation dialog.
TM
Update device catalog
TM
TM
is ready for use.
are now installed.
TM
device catalog.
.