Pepperl+Fuchs HD2-DM-A Manual page 70

Advanced Diagnostics
FDS/OPC Integration
9.
Choose Next.
System warning and alarm limit values are now stored on the diagnostic device.
Figure 5.33
10.
Choose Restart to confirm changed settings and to return to the commissioning wizard start
page.
11.
Repeat segment commissioning for the remaining segments.
5.6.6 Generate Report for HD2-DM-A.RO DIP Switch Settings
Once commissioning of all 4 segments is complete, the commissioning wizard supports gener-
ation of a report with the correct DIP switch settings for the HD2-DM-A.RO module.
Generating a HD2-DM-A.RO Settings Report
In order to generate a settings report for the HD2-DM-A.RO module, proceed as follows:
1.
Open the commissioning wizard. See chapter 5.6.3
2.
Perform system commissioning. See chapter 5.6.4
3.
Perform segment commissioning. See chapter 5.6.5
4.
In the HD2-DM-A.RO settings section of the commissioning wizard start page, choose
Generate RO Report.
The system generates a report that can be printed and saved.
Figure 5.34
70
Segment commissioning succeeded
Snapshot explorer - HD2-DM-A.RO settings report