Table of Contents
Advertisement
Advanced Diagnostics
Appendix
Status
Overview of all connected ADMs and their diagnostic states.
Configuration
•
Modify network settings of the DGW.
Warning: If you change the IP settings to an invalid value, you cannot access the web
server again. In this case, use the diagnostic gateway configuration tool to correct the val-
ues.
•
Change the diagnostic gateway mode to FDS or FF.
•
Unlock the diagnostic gateway if it is locked from an FDS.
•
Locate the device. The device flashes all LEDs of the diagnostic gateway.
•
Check the firmware revision and the MAC ID.
•
Update the firmware of the diagnostic gateway.
Subnet Scan
The subnet scan window shows a list of all diagnostic gateways in the same TCP/IP subnet and
the status of their connected ADMs. The IP address of the listed diagnostic gateway is a link.
Click the link to open the corresponding website.
Cabinet Management
The cabinet management window shows the current measured data for the cabinet manage-
ment I/Os and the associated configuration.
197
Advertisement
Table of Contents
