Pepperl+Fuchs HD2-DM-A Manual page 68

Advanced Diagnostics
FDS/OPC Integration
5.6.3 Commissioning Wizard
The commissioning wizard is a tool for fast and easy system setup with advanced diagnostic
modules (ADM). It guides the user through the system and segment set up and determines the
system and segment data of your fieldbus installation. Based on this information, the commis-
sioning wizard proposes limit values for all system, segment, and field device alarm values. If
necessary, you can edit the limit values or store them on the ADM. After the commissioning
wizard has been completed successfully, the ADM is ready for plant real-time monitoring.
Opening the Commissioning Wizard
In order to open the commissioning wizard, proceed as follows:
1.
Right-click the Advanced Diagnostic Module in the project section.
2.
Choose Additional Functions > Commissioning Wizard.
The commissioning wizard window appears.
Figure 5.31
5.6.4 System Commissioning
Performing System Commissioning with the Commissioning Wizard
In order to perform system commissioning, proceed as follows:
1.
Open the commissioning wizard. See chapter 5.6.3
2.
Select your fieldbus type from the Fieldbus Type drop-down list.
3.
Choose System Commissioning.
The system displays the current motherboard and power supply data.
4.
Choose Next.
The system takes a snapshot and displays the current system data with the automatically
calculated maintenance and limits alarms.
68
Commissioning wizard window