Advertisement
Quick Links
Advertisement
Related Manuals for Pepperl+Fuchs PROFINET VBG-EP1-KE5-D Series
Summary of Contents for Pepperl+Fuchs PROFINET VBG-EP1-KE5-D Series
- Page 1 PROFINET: Changeover from ASi gateways type K20 to KE5 Brief Instructions...
- Page 2 Phone: +49 621 776 - 0 E-mail: info@de.pepperl-fuchs.com North American Headquarters Pepperl+Fuchs Inc. 1600 Enterprise Parkway Twinsburg, Ohio 44087 Phone: +1 330 425-3555 E-mail: sales@us.pepperl-fuchs.com Asia Headquarters Pepperl+Fuchs Pte. Ltd. P+F Building 18 Ayer Rajah Crescent Singapore 139942 Phone: +65 6779-9091 E-mail: sales@sg.pepperl-fuchs.com https://www.pepperl-fuchs.com...
- Page 3 PROFINET: Changeover from ASi gateways type K20 to KE5 Contents Introduction........................ 4 Switch connections ....................5 Transfer Configuration .................... 10 PROFINET Integration ..................... 11...
-
Page 4: Introduction
PROFINET: Changeover from ASi gateways type K20 to KE5 Introduction Introduction Changeover from ASi gateways with PROFINET interface type K20 to the new VBG-EP1-KE5-D* With these instructions, you can easily switch from previously used K20 gateways to the new KE5 gateways. The following advantages result from a change: •... -
Page 5: Switch Connections
PROFINET: Changeover from ASi gateways type K20 to KE5 Switch connections Switch connections Ethernet Change Ethernet Remove the Ethernet connections from the K20 sockets PROFINET 1 and PROFINET 2 Insert the Ethernet connectors into the sockets X1 and X2 at the VBG-EP1-KE5-D*. →... - Page 6 PROFINET: Changeover from ASi gateways type K20 to KE5 Switch connections ASi Power Supply Note If you are using a K20 gateway with integrated data decoupling so far, you need a special ASi power supply for the supply of the KE5 gateway. Change power supply to VBG-EP1-KE5-D Take the power supply connections out of the K20 sockets ASi PWR+/-.
- Page 7 PROFINET: Changeover from ASi gateways type K20 to KE5 Switch connections Change power supply to VBG-EP1-KE5-DMD Take the power supply connections out of the K20 sockets ASi1 PWR+/- and ASi2 PWR+/-. Plug the connections of the power supply into the sockets 13 and 11 for ASi network 1 and 03 and 01 for ASi network 2.
- Page 8 PROFINET: Changeover from ASi gateways type K20 to KE5 Switch connections ASi Network Change ASi network to VBG-EP1-KE5-D Take the connectors of the ASi network out of the K20 sockets ASi +/-. Plug the connectors for the ASi network into the sockets 04 and 02. Hold to config.
- Page 9 PROFINET: Changeover from ASi gateways type K20 to KE5 Switch connections Change ASi network to VBG-EP1-KE5-DMD Take the connectors of the ASi network 1 and 2 out of the K20 sockets ASi1 +/- and ASi2 +/-. Plug the connectors for ASi network 1 into the sockets 04 and 02 for ASi network 2 into the sockets 14 and 12 Hold to config.
-
Page 10: Transfer Configuration
PROFINET: Changeover from ASi gateways type K20 to KE5 Transfer Configuration Transfer Configuration Store ASi configuration on KE5 gateway Connect the VBG-EP1-KE5-D*, see chapter 2. Press and hold the pushbutton for 5 seconds. The ASi 1 LEDs flash yellow. The configuration of the ASi network 1 can be saved. Press and hold the pushbutton for 5 seconds. -
Page 11: Profinet Integration
PROFINET: Changeover from ASi gateways type K20 to KE5 PROFINET Integration PROFINET Integration Save the configuration of the K20 gateway Before you add the KE5 gateway to your PROFINET project, save the relevant configurations of the K20 gateway, e.g. by taking a screenshot: •... - Page 12 PROFINET: Changeover from ASi gateways type K20 to KE5 PROFINET Integration Add VBG-EP1-KE5-D* to the PROFINET controller Remove the K20 gateway from the network. Add the new KE5 gateway to the PROFINET controller. Figure 4.1 Assign PROFINET station name Assign the station name of the K20 gateway to the VBG-EP1-KE5-D*. Configuration of the data image and device parameters Enable "Download device parameters"...
- Page 13 PROFINET: Changeover from ASi gateways type K20 to KE5 PROFINET Integration Figure 4.3 Note If you want to use analog devices after adding the data image, you need to adjust the device parameters of the respective address to the previously used settings.
- Page 14 Pepperl+Fuchs Quality Download our latest policy here: www.pepperl-fuchs.com/quality www.pepperl-fuchs.com © Pepperl+Fuchs · Subject to modifications / DOCT-8495...