Pepperl+Fuchs HD2-DM-A Manual page 80

Advanced Diagnostics
FDS/OPC Integration
Button
5.10 Advanced Parameterization and Parameterization
The diagnostic manager offers 2 user interfaces for detailed parameterization:
• Offline parameterization
• Online parameterization
These 2 interfaces allow tuning the behavior of all aspects of the advanced diagnostics. For
typical operation, they are not required because measurement, commissioning wizard, and
diagnostics offer a more advanced usage of the advanced physical layer diagnostics.
The main difference between the 2 user interfaces is their relationship to the advanced diag-
nostic module (ADM):
• Parameterization is an offline user interface. All data is stored in the FDT project. The data
is not sent to the device until a download is executed. Use this user interface to view data
loaded into the FDT project by an upload, e.g., for backup reasons.
• Advanced parameterization is an online interface. All changes are directly written to the
device. The data is not stored automatically in the FDT project. In order to save the data to
the FDT project, upload the data first.
80
Name
Zoom out
Zoom 100%
Fit to height
Fit to width
First page
Previous page
Next page
Last page
Result
Reduce the report.
View of the report of 100 %.
Fit the view of the report on the height.
Fit the view of the report on the width.
Go to the first page of the report.
Go to the previous page of the report.
Go to the next page of the report.
Go to the last page of the report.