Digital Channels
This chapter describes how to use the digital channels of a Mixed-Single Oscilloscope
(MSO).
The digital channels are enabled on T3DSO2000 series oscilloscopes that have the
MSO activation license installed.
This chapter contains the following items:
�
To Connect the Digital Probes to the Device-under-test
�
Acquiring Waveform Using the Digital Channels
�
To Change the Display Type of the Digital Channels
�
To Switch a Single Channel On or Off
�
To Switch All Digital Channels On or Off
�
To Change the Logic Threshold for Digital Channels
�
To Reposition a Digital Channel
�
To Display Digital Channels as a Bus
1.800.561.8187
www.
.com
information@itm.com
111