Table of Contents
Advertisement
Noise Rejection
Noise Reject adds additional hysteresis to the trigger circuitry. By increasing the trigger
hysteresis band, you reduce the possibility of triggering on noise. However, this also
decreases the trigger sensitivity so that a slightly larger signal is required to trigger the
oscilloscope.
Press the Setup button on the front panel, and then press the Noise Reject softkey
continually to set the option to On or Off to turn on or off the noise rejection function.
Figure 22: No Trigger Noise Rejection
Figure 23: Turn on Noise Reject
1.800.561.8187
information@itm.com
56
www.
.com
Advertisement
Table of Contents
