To Save Reference Waveform
T3DSO2000 can save analog channels or math waveforms to one of four reference
waveform locations in the oscilloscope internal memory. Then, a reference waveform can
be displayed and compared against other waveforms. Four reference waveforms can be
displayed at a time.
Use the Variable knob and the Position knob on the right side of the front panel to adjust
the vertical scale and the vertical position of REF waveform.
The contents of this chapter:
�
To Save REF Waveform to Internal Memory
�
To Display REF Waveform
�
To Adjust REF Waveform Display
�
To Clear REF Waveform Display
1.800.561.8187
118
www.
.com
information@itm.com