Working Environment - Teledyne T3DSO2000 Series User Manual

Working Environment

Temperature
Operating: 10℃ to +40℃
Non-operation:-20℃ to +60℃
Humidity
Operating: 85% RH, 40℃, 24 hours
Non-operating: 85% RH, 65℃, 24 hours
Altitude
Operating: less than 3 km
Non-operation: less than 15 km
Installation (Over Voltage) Category
This product is powered by mains conforming to installation (over-voltage) category II.
Installation (Over-voltage) Category Definitions
Installation (over-voltage) category II refers to the local power distribution level which is
applicable to equipment connected to the AC line (AC power).
1.800.561.8187
VI
WARNING
To avoid short circuit inside the instrument or electric shock, please do not
operate in humid environment.
WARNING
Make sure that no over-voltage (such as that caused by lightning) can reach
the product or else the operator might be exposed to danger of electric shock.
www.
information@itm.com
.com