To Specify Amplitude Unit; To Invert A Waveform - Teledyne T3DSO2000 Series User Manual

To Specify Amplitude Unit

Select the amplitude display unit for the current channel. The available units are V and A.
When the unit is changed, the unit displayed in the channel label will change accordingly.
1. Press CH1 button on the front panel to enter the CH1 function menu.
2. Press the Next Page softkey to enter the second page of the CH1 function menu.
3. Press the Unit softkey to select the desired unit V or A.
The default setup is V.

To Invert a Waveform

When Invert is set to On, the voltage values of the displayed waveform are inverted.
Invert affects how a channel is displayed and not the trigger settings.
Inverting a channel also changes the result of any math function selected and
measurement functions.
1. Press CH1 button on the front panel to enter the CH1 function menu.
2. Press the Next Page softkey to enter the second page of the CH1 function menu.
3. Press the Invert softkey to turn on or off the invert display.
1.800.561.8187 information@itm.com
28
www. .com