General Care And Cleaning - Teledyne T3DSO2000 Series User Manual

General Care and Cleaning

Care
Do not store or leave the instrument in direct sunshine for long periods of time.
Cleaning
Please perform the following steps to clean the instrument and probe regularly according
to its operating conditions.
1. Disconnect the instrument from all power sources and then clean it with a soft wet
cloth.
2. Clean the loose dust on the outside of the instrument and probe with a soft cloth.
When cleaning the LCD, take care to avoid scratching it.
1.800.561.8187
VIII
WARNING
To avoid damage to the instrument or probes, please do not leave them in fog,
liquid, or solvents.
WARNING
To avoid damage to the surface of the instrument and probe, please do not
use any corrosive liquid or chemical cleanser.
WARNING
Make sure that the instrument is completely dry before restarting it to avoid
short circuits or personal injury.
www.
information@itm.com
.com