Menu - Teledyne T3DSO2000 Series User Manual

Menu

.
1.800.561.8187
18
Press the button to open the cursor function. It provides manual and tracking
cursor modes.
Press the button to enter the sampling menu. From here the acquisition mode
can be set (Normal/Peak-Detect/Average/Eres), interpolation mode (Sinx/x or
linear) and memory depth. The XY mode can be selected here as well as the
Sequence function.
Press the button to enter the file save and recall function menu. The storable
file types include Setups, Waveforms, Picture and References.
Press the button to open the WaveGen menu. The T3DSO2000 provides a
built-in function generator (optional). 11 types of Waveforms including Sine,
Square, Ramp, Pulse, DC, Noise, Cardiac, Gauss Pulse, ExpRise, ExpFall
and Arb are supported.
Press the button to enter the measurement setting menu. The user can set
measurement type(s), statistics and gating. Up to five parameters can be
selected.
Press the button to enter the display menu and quickly enable the persist
function. User can set the grid, Intensity, brightness, transparency.
Press the button to enter the utility menu to set system functions or parameters,
such as I/O set, sound, and screen language. In addition, some advanced
functions (such as Pass/Fail, Self Cal, install option function and Update) are
also supported.
Press this button to enter the history mode. History mode can record up to
80,000 frames. If the Sequence function is enabled, only the selected frames
are recorded (up to 80,000).
www.
information@itm.com
.com