To Connect The Probe - Teledyne T3DSO2000 Series User Manual

To Connect the Probe

Teledyne Test Tools provides passive probes for the T3DSO2000 series oscilloscopes.
For detailed technical information of the probes, please refer to the corresponding Probe
User's Guide.
Connect the Probe:
1. Connect the BNC terminal of the probe to one of the channel BNC connectors on the
front panel.
2. Connect the probe tip to the circuit point under test and the ground alligator clip of the
probe to the ground terminal of the circuit.
1.800.561.8187
www. .com
information@itm.com
7