To Clear The Display - Teledyne T3DSO2000 Series User Manual

3. When the Persist is On, to erase the results of previous acquisitions from the display,
press the Clear Persist softkey. The oscilloscope will start to accumulate acquisitions
again.
4. To return to the normal display mode, turn off persist and the previous acquisitions will
be cleared at once.

To Clear the Display

Press the Display button on the front panel to enter the DISPLAY function menu; press
the Clear Display softkey to clear all the waveforms displaying on the screen. Acquire
and display new waveforms.
1.800.561.8187
146
Figure 84: Persist Set to Infinite
www. .com
information@itm.com