Front Panel Function Overview; Horizontal - Teledyne T3DSO2000 Series User Manual

Front Panel Function Overview

Horizontal

Horizontal Position Knob:
display. The waveform will move left or right when you turn the knob. Meanwhile, the Delay
value will increase or decrease as the waveform moves. Press the knob to reset the trigger
delay to Zero.
Horizontal Scale Knob:
clockwise or counterclockwise to reduce or increase the timebase. The displayed waveform
will be expanded or compressed when the timebase changes. Press the knob to enter into
the Zoom mode.
1.800.561.8187
12
Quickly enter the roll mode. The timebase range is from 1ns/div to 50s/div.
Press the button to open the Zoom function and press again to close the
function.
Sets the horizontal location of the trigger event on the
Sets the timebase (horizontal sweep speed). Turn it
www.
information@itm.com
.com