To Perform A Self-Test; Screen Test - Teledyne T3DSO2000 Series User Manual

To Perform a Self-Test

Self-tests include screen test, keyboard test, control knobs and LED test.

Screen Test

1. Press the Utility button on the front panel to enter the UTILITY function menu.
2. Press the Next Page softkey to go to the second page of the UTILITY function menu.
3. Press the Next Page softkey to go to the third page of the UTILITY function menu.
4. Press the Do Self Test softkey to enter the SELFTEST function menu.
5. Press the Screen Test softkey to enter the screen test interface, as the picture shown
below, the screen display is pure red.
6. Press the Single button on the front panel continually as it says in the picture above.
The screen displays green, blue and red again. It is easy to check chromatic
aberration, stains and scratches of the screen under these condition.
7. Press the Run/Stop button on the front panel to exit the screen test program.
1.800.561.8187
Figure 95: Screen T est
www. .com
information@itm.com
172