Table of Contents
Advertisement
Keyboard Test
Keyboard test is used to test that the keys or the knobs are working correctly.
Do the following steps to do keyboard test:
1. Press the Utility button on the front panel to enter the UTILITY function menu.
2. Press the Next Page softkey to go to the second page of the UTILITY function menu.
3. Press the Next Page softkey to go to the third page of the UTILITY function menu. 4.
Press the Do Self Test softkey to enter the SELFTEST function menu.
5. Press the Keyboard Test softkey to enter the keyboard test interface, as the picture
shown below.
6. To perform the knobs and the buttons test.
Knobs test: The default value is 0. Turn left to increase the value while turn right to
decrease; push the knob to set the value to 0. Test every knob randomly.
Keys test: The first time to press the key to light it up, and a second press to die out.
Test every button randomly.
7. Press the Run/Stop button 3 times to exit the keyboard test program.
1.800.561.8187
173
Figure 96: Keyboard Test
www.
.com
information@itm.com
Advertisement
Table of Contents
