To View The System Status - Teledyne T3DSO2000 Series User Manual

To View the System Status

Do the following steps to view the system status:
1. Press the Utility button on the front to enter the UTILITY function menu.
2. Press the System Status softkey to view the system status of the oscilloscope. The
system status includes the information below:
�
�
�
�
�
�
�
3. Press the Single button on the front panel to exit.
1.800.561.8187
160
Startup Times: Displays the number of boot-strap routines of the oscilloscope.
Software Version: Lists the current software version of the oscilloscope.
FPGA Version: Lists the current FPGA version of the oscilloscope.
Hardware Version: Lists the current hardware version of the oscilloscope.
Product Type: Displays the product type of the oscilloscope.
Serial NO.: Lists the serial number of the oscilloscope.
Scope ID: Displays the identification of the oscilloscope.
www.
Figure 91: System Status
.com
information@itm.com