Internal Save And Recall - Teledyne T3DSO2000 Series User Manual

Internal Save and Recall

Internal save and recall support Setups in Save/Recall. In the following part, the save and
recall method and procedures are introduced.
�� Save the specified oscilloscope setting in internal memory.
1. Connect the signal to the oscilloscope and obtain stable display.
2. Press Save/Recall button on the front panel to enter the SAVE/RECALL function
3. Press the Save softkey to enter the SAVE function menu.
4. Press the Type softkey and then turn the Universal Knob to select Setups; and
5. Press the Save To softkey to select Internal to save the current setup of the
6. Press the Setup softkey button,and then turn the Universal Knob to select the
7. Press the Save softkey to save the current setup to the appointed location. After a
�� Load the specified type of file in internal memory.
If want to recall the setup after having finished the steps above, please do the
following steps:
1.
2.
3.
Note: To delete a setup file in memory, please save a new setup to the same location to
1.800.561.8187
152
menu.
then press the knob to confirm.
oscilloscope to the internal memory.
location to save. The internal memory can save as many as 20 setup files, from
No.1～No.20.
few seconds, it will pop-out the message 'Store Data success!'
Return to the SAVE/RECALL function menu.
Press the Recall softkey to enter the RECALL function menu.
Press the Setup softkey, and then turn the Universal Knob to select the location
that you want to recall, press the Recall softkey to recall the setup, and it will
pop-out the message 'Read Data Success!'
overwrite it.
www.
information@itm.com
.com