Table of Contents
Advertisement
AD8000 Series Spectrum Analyzer Instruction
Manual
2.1.1 Front Panel Overview
The AD8000 Series menu-driven interface is easy to use and requires little
training. The five main menu keys below the screen and eight submenu
keys on the right side are menu keys. Function keys on the right consist of
six main function keys and twelve measurement function keys. There are
12 number keys, including number 0 to 9, +/- and '.' Key. There is also a
knob for changing and selecting.
Note: the pop-up menu of some keys are the same in all circumstances,
others might be different under different measurement mode and type. For
details, please see 2.4.
1
Main Menu Keys
Five main menu keys are below the display screen.
MODE
FREQ
AMP
MEAS
MEAS SETUP
2
Sub-menu Keys
There are 8 sub-menu keys at the right of the screen shown as fig. 2-1. They
could change the settings of the device with other keys.
3
Main Function Keys
There are 6 main function keys at the top of the key area at the right of the
screen shown as fig. 2-1.
8
Press the key, and then select a measurement mode
by pressing the corresponding sub-menu key.
active the frequency menu, set relevant parameter
active the amplitude menu, set relevant parameter
active the measurement menu, select measurement
type
up
measurement
measurement type
parameters
for
different
Advertisement
Table of Contents
