Basic Parameter Settings - ADInstruments AD8000 Series Instruction Manual

AD8000 Series Spectrum Analyzer Instruction
Manual
Fig. 3-85 Adjacent Channel Power Amplitude Menu

3.4.2 Basic Parameter Settings

The basic parameter settings of Adjacent Channel Power is same as channel
power. It is only about the video average and scan type; other parameters
such as RBW, VBW, sweep time and etc. are set by system default and
unchangeable.
The setting of basic parameter is done with CPL key. Press the soft-key, and
the following menu would pop up.
Fig. 3-86 Basic Parameter Settings
97