Carrying Bag - ADInstruments AD8000 Series Instruction Manual

AD8000 Series Spectrum Analyzer Instruction
Manual
Before using the spectrum analyzer, the battery should be charged. AC/DC
power adaptor and vehicle cigarette ligter 12VDC adaptor could be used.
NOTE: Use only batteries, adapters, and chargers provided with this
instrument.
Warning: When using the Vehicle charger, Make sure that the supply is
rated for a minimum of 60 Watts at 12 VDC, and the socket is clean without
any dirt or debris. If the adapter plug becomes hot to the touch during
charging, Please discontinue using immediately.
NOTE: AD INSTRUMENTS recommends removing the battery for long-term
storage of the instrument.

Carrying Bag

1.6
The AD8000 can be operated in the soft carrying bag. On the back of the
case there is a large storage pouch for accessories and power supply.
To install the instrument into the soft carrying case:
1. The front panel of the case is secured with hook-and-loop fasteners.
Fully close the front panel of the case. When closed, the front panel
supports the shape of the case while you are inserting the AD8000.
2. Place the soft carrying case face down on a stable surface, with the
front panel fully closed and laying flat.
3. Open the bag from the top.
4. Put the device in considering the position of the device connector.
5. Put on the back cover.
4