Basic Parameter Setting - ADInstruments AD8000 Series Instruction Manual

AD8000 Series Spectrum Analyzer Instruction
Manual

3.5.2 Basic Parameter Setting

The basice parameter setting of occupied BW is the same as channel power,
only about the setting of video average and sweep mode. Other parameters
such as RBW, VBW, sweep time and etc. are default, not changeable.
The setting of basic parameter is done with CPL key.
Press the soft key, and the following menu would pop up.
106
Fig. 3-96 Basic Parameter Setting Menu (Page 1)
Fig. 3-97 Basic Parameter Setting Menu (Page 2)