Basic Parameter Settings - ADInstruments AD8000 Series Instruction Manual

AD8000 Series Spectrum Analyzer Instruction
Manual

3.3.2 Basic Parameter Settings

The basic parameter setting is quite easy comparing with spectrum sweep.
It is only related to the setting of video average and scan type. Other
parameters such as resolution BW, VBW, sweep time and etc. are
configured by system, not changeable.
The basic parameter settings is implemented through CPL key. Press the
key, and the following menu would pop up.
Fig. 3-72 Ref Offset 30 dB/
Fig. 3-73 Basic Parameter Settings
87