Menu Operation - ADInstruments AD8000 Series Instruction Manual

AD8000 Series Spectrum Analyzer Instruction
Manual

2.2.2 Menu Operation

There are 8 typical menus, and each is described below in detail.
1 Setting Parameters
Press the corresponding menu, and the parameter shows in the middle of
the screen. Use the number keys, arrow keys or the knob to set the
parameter, and press the Enter key to exit.
Example: Menu of 'Cent Freq'.
2 Enter the next submenu (without parameter)
Press the corresponding menu key to enter the next submenu. These
menus are marked by '>'.
Example: Menu of 'Trace>'.
3 Enter the next submenu (with parameters)
Press the corresponding menu key to enter the next submenu to select an
option, and then return to the previous menu automatically. These menus
are marked by '>'.
Example: Menu of 'Detector Mode>'.
4 Active Dialog box
Press the corresponding menu key, and there would be a dialog box
popped up. These menus are marked by '=>'.
Example: Menu of 'Limit=>'.
5 Implement the menu function
Press the menu key to implement the corresponding function.
Example: Menu of 'Single Sweep'.
6 Two functions switch (no parameter)
Press the corresponding menu button to switch the two functions.
Example: Menu of 'Log/Lin'.
7 Two functions switch (with parameters)
14