ADInstruments AD8000 Series Instruction Manual page 179

AD8000 Series Spectrum Analyzer Instruction
Manual
7) Click on 'Clear All' to clear all measurement data on the map.
8) Click on 'Back' to clear the data between the current mark point and
the previous one, which means 'back'.
2．Free measurement
Mark at the corresponding location on the indoor map; and make the
current measurement data as the measurement data of the changed point.
1) Press Mark button, and move the marker to the current position by
selection 'Move Mark'.
2) Press 'Mark' to show the measurement result on the map.
Fig. 6-9 Generate Time Measurement Data
163