AD8000 Series Spectrum Analyzer Instruction
Manual
10.1.3 Create Valid Command
Since the command is not case sensitive, every command may have
multiple expressions. Examples of valid command are shown below:
Command Syntax
[SENSe:]BANDwidth[:RESolution]
<freq>
UNIT:POWer?
[:SENSe]:DETector[:
FUNCtion]NEGative|POSitive|SAMPle
INITiate:CONTinuous ON|OFF|1|0
Valid Command
Sense:Band:Res 1700
sens:band 1.7KHZ
band 1.7kHz
Unit:Pow?
UNIT:POW?
uNIT:POWER?
DET:FUNC neg
Detector:Func Pos
INIT:CONT ON
init:continuous 1
197