Buzzer - ADInstruments AD8000 Series Instruction Manual

AD8000 Series Spectrum Analyzer Instruction
Manual

9.3.3 Buzzer

AD8000 has a built-in buzzer used for buzzing for faulty operation or device
breakdown. Users could set the status of the buzzer. Press the "Beep
Settings" soft-key, and the following menu will pop up.
The difference between the prompt beep and alarm beep is volume. User
can test the 2 alarm functions by pressing 'Test Promt Beep' and 'Test
Alarm Beep'. Press the test function key, and buzzer will be forced to beep
once no matter what status the buzzer is in.
When buzzer is turned on, there will be a corresponding voice prompt for
each button. There would be an audible alarm for illegal operation or low
battery with the buzzer turning on.
Fig. 9-10 Buzzer Setting Menu
191