AD8000 Series Spectrum Analyzer Instruction
Manual
3.4.3 Measurement Parameter Settings
The measurement parameter setting is done with
and the following menu which could be used to set some special functions
of adjacent channel power would pop up.
Parameter Setting
1
Press the soft-key, and the parameter setting dialog box will pop up. Set
current focus with the knob, and the selected item is the current setable
item. Drop down the menu or manually input to set the needed parameters,
and then press 'OK' to save the settings and exit the dialog, 'Cancel' to
cancel the settings and exit the dialog box.
98
Fig. 3-87 Measurement Parameter Setting Menu
M E A S
key. Press the key,
SETUP