Pc Hardware Setting - ADInstruments AD8000 Series Instruction Manual

AD8000 Series Spectrum Analyzer Instruction
Manual

10.2.2 PC Hardware Setting

Since AD8000 only supports 10M network card, before using Ethernet to
control remotely, if the network card of PC is not 10M, it should be changed
to 10M enforcedly. The configuration method is as below:
Right click on My Computer, select Attribute, and the dialog box of figure
10-4 would pop up.
(1) Select Hardware -> Device Manager shown in figure 10-4, and the
device management dialog box as figure 10-5 would pop up.
204
Fig. 10-4 Attribute Dialog Box
Fig. 10-5 Device Manager Dialog Box