Dot1X; Enable - Interlogix NS4702-24P-4X Command Manual

Chapter 4: Commands for CLI configuration
Switch# do show aaa
console : local
telnet : local
ssh : local
http : local

dot1x

dot1x initialize
Command:
dot1x initialize [ interface ( <port_type> [ <plist> ] ) ]
dot1x IEEE Standard for port-based Network Access Control
initialize Force re-authentication immediately
Default:
N/A
Usage Guide:
To re-authenticate specific interface immediately.
Example:
To re-authenticate specific interface (GigabitEthernet 1/1) immediately.
Switch# dot1x initialize interface GigabitEthernet 1/1

enable

enable
Command:
enable
enable Turn on privileged commands
Default:
None
Usage Guide:
To enter enable mode
Example:
To enter enable mode
Switch > enable
Switch #
234 NS4702-24P-4X Managed Switch Command Guide