Interlogix NS4702-24P-4X Command Manual page 66

Chapter 4: Commands for CLI configuration
ip arp inspection trust
Command:
ip arp inspection trust
arp Address Resolution Protocol
inspection ARP inspection
trust ARP inspection trust config
Default:
Trusted
Usage Guide:
To configure Trusted into ARP inspection for specific interface
Example:
To configure Trusted into ARP inspection for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # ip arp inspection trust
ip dhcp snooping trust
Command:
ip dhcp snooping trust
Default:
Trusted
Usage Guide:
To configure Trusted into DHCP Snooping for specific interface
Example:
To configure Trusted into DHCP Snooping for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # ip dhcp snooping trust
ip igmp snooping filter
Command:
ip igmp snooping filter <ProfileName : word16>
<ProfileName : word16>
Default:
N/A
Usage Guide:
To apply the IGMP Snooping filter ID for specific interface
64
Profile name in 16 words
NS4702-24P-4X Managed Switch Command Guide