Interlogix NS4702-24P-4X Command Manual page 226

Chapter 4: Commands for CLI configuration
username
Command:
username <username> privilege <priv> password { encrypted
<encry_password> | none | unencrypted <password> }
username Establish User Name Authentication
<Username : word31>
privilege Set user privilege level
<privilegeLevel : 0-15>
password Specify the password for the user
encrypted Specifies an ENCRYPTED password will follow
none NULL password
unencrypted Specifies an UNENCRYPTED password will follow
<Password : word4-44>
Default:
None
Usage Guide:
To configure the Profiles of Username
Example:
To configure the Profiles of Username (Username: 1234, Password: 1234,
Privilege Level: 15)
Switch# configure terminal
Switch (config)# username 1234 privilege 15 password
unencrypted 1234
Press ENTER to get started
Username: 1234
Password: 1234
#
vlan
Command:
vlan <vlist>
vlan VLAN commands
<vlan_list> VLAN IDs 1~4095
Default:
None
Usage Guide:
To create the VLAN Profiles
Example:
To create the VLAN Profiles (VLAN 5)
224
User name allows letters, numbers and underscores
User privilege level
The ENCRYPTED (hidden) user password. Notice the
ENCRYPTED password will be decoded by system
internally. You cannot directly use it as same as the
Plain Text and it is not human-readable text
NS4702-24P-4X Managed Switch Command Guide