Interlogix NS4702-24P-4X Command Manual page 224

Chapter 4: Commands for CLI configuration
transport email smtp-server
Command:
transport email smtp-server { <ipv4_addr> | <server> } port
<1_to_65535>
transport Enable or disable transport email function.
email Enable or disable transport email function.
smtp-server Set the SMTP server name or IP address of the SMTP server
<ipv4_ucast>
<server> hostname
port port
<1-65535> port_number: Specifies the port number. The range is from 1 to
Default:
N/A
Usage Guide:
To configure SMTP Server address and port number.
Example:
To configure SMTP Server address (mail.interlogix.com) and port number (123)
Switch# configure terminal
Switch (config)# transport email smtp-server
mail.interlogix.com port 123
transport email to
Command:
transport email to <1 | 2> <mail_addr>
transport Enable or disable transport email function.
email Enable or disable transport email function.
to receiver's email
<1|2> 1: mail address 1
<mail_addr> mail address
Default:
N/A
Usage Guide:
To configure SMTP destination mail address.
Example:
To configure SMTP destination mail address 1 (ss@interlogix.com).
Switch# configure terminal
Switch (config)# transport email to 1 ss@interlogix.com
upnp
Command:
upnp
222
<ipv4_addr>: IP address
65535. The default port number is 25.
2: mail address 2
NS4702-24P-4X Managed Switch Command Guide