Interlogix NS4702-24P-4X Command Manual page 274

Chapter 4: Commands for CLI configuration
Switch # show ip verify source interface GigabitEthernet 1/1
Port
----
GigabitEthernet 1/1
show ipmc profile
Command:
show ipmc profile [ <profile_name> ] [ detail ]
show Show running system information
ipmc IPv4/IPv6 multicast configuration
profile IPMC profile configuration
<ProfileName : word16>
detail Detail information of a profile
Default:
N/A
Usage Guide:
To display the IP Multicast Profile.
Example:
To display the IP Multicast Profile.
Switch # show ipmc profile
IPMC Profile is now enabled to start filtering.
Profile: 1 (In VER-INI Mode)
Description: test
show ipmc range
Command:
show ipmc range [ <entry_name> ]
show Show running system information
ipmc IPv4/IPv6 multicast configuration
range A range of IPv4/IPv6 multicast addresses for the profile
<EntryName : word16>
Default:
N/A
Usage Guide:
To display the IP Multicast Range.
Example:
To display the IP Multicast Range.
272
Port Mode Dynamic Entry Limit
--------- -------------------
enabled
Profile name
Range entry name
1
NS4702-24P-4X Managed Switch Command Guide