Interlogix NS4702-24P-4X Command Manual page 89

qos Quality of Service
dpl Drop precedence level configuration
<Dpl : dpl> Specific drop precedence level
Default:
0
Usage Guide:
To configure DPL of QoS for specific interface
Example:
To configure DPL (1) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos dpl 1
qos dscp-classify
Command:
qos dscp-classify any | selected | zero
qos Quality of Service
dscp-classify
any Classify to new DSCP always
selected Classify to new DSCP if classify is enabled for specific DSCP value in
zero Classify to new DSCP if DSCP is 0
Default:
Disabled
Usage Guide:
To configure DSCP Classify of QoS for specific interface
Example:
To configure DSCP Classify (Any) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos dscp-classify any
qos dscp-remark
Command:
qos dscp-remark remap | rewrite
qos Quality of Service
dscp-remark
remap Rewrite DSCP field using classified DSCP remapped through global
dscp-egress-translation map
rewrite Rewrite DSCP field with classified DSCP value (no translation)
Default:
Disabled
Usage Guide:
To configure DSCP egress remarking of QoS for specific interface
NS4702-24P-4X Managed Switch Command Guide
DSCP ingress classification
global dscp-classify map
DSCP egress remarking
Chapter 4: Commands for CLI configuration
87