Interlogix NS4702-24P-4X Command Manual page 286

Chapter 4: Commands for CLI configuration
IGMP MVR VLAN 1 (Name is 1) interface is enabled.
Querier status is IDLE
RX IGMP Query:0 V1Join:0 V2Join:0 V3Join:0 V2Leave:0
TX IGMP Query:0 / (Source) Specific Query:0
Interface Channel Profile: <No Associated Profile>
Switch-1 MVR-MLD Interface Status
MLD MVR VLAN 1 (Name is 1) interface is enabled.
Querier status is IDLE
RX MLD Query:0 V1Report:0 V2Report:0 V1Done:0
TX MLD Query:0 / (Source) Specific Query:0
Interface Channel Profile: <No Associated Profile>
show network-clock
Command:
show network-clock
show Show running system information
network-clock
Default:
N/A
Usage Guide:
To display the SyncE information.
Example:
To display the SyncE information.
Switch # show network-clock
Selector State is: Free Run
Alarm State is:
Clk:
LOCS:
SSM:
WTR:
LOL: FALSE
DHOLD: TRUE
SSM State is:
Interface
GigabitEthernet 1/1
284
Show selector state
1 2
FALSE FALSE
FALSE FALSE
FALSE FALSE
Tx SSM
QL_NONE
Rx SSM Mode
QL_LINK Master
NS4702-24P-4X Managed Switch Command Guide