Interlogix NS4702-24P-4X Command Manual page 254

Chapter 4: Commands for CLI configuration
Switch # show evc all
EVC ID Status
------ ------
1 Active
show evc statistics
Command:
show green-ethernet [ interface ( <port_type> [ <port_list> ] ) ]
show Show running system information
green-ethernet
Default:
N/A
Usage Guide:
To display the EVC statistics.
Example:
To display the EVC Red Frames statistics for all.
Switch # show evc statistics all red
EVC ID Interface
------ ----------------------- --------------------
1 GigabitEthernet 1/1
1 GigabitEthernet 1/2
show green-ethernet
Command:
show green-ethernet [ interface ( <port_type> [ <port_list> ] ) ]
show Show running system information
green-ethernet
interface Shows green ethernet status for a specific port or ports.
Default:
N/A
Usage Guide:
To display the Green Ethernet status.
Example:
To display the Green Ethernet status for all.
Switch # show green-ethernet interface *
252
Green ethernet (Power reduction)
Rx Red Frames
0
0
Green ethernet (Power reduction)
NS4702-24P-4X Managed Switch Command Guide