Interlogix NS4702-24P-4X Command Manual page 262

Chapter 4: Commands for CLI configuration
Default:
N/A
Usage Guide:
To display the ARP Inspection entry.
Example:
To display the ARP Inspection entry.
Switch # show ip arp inspection entry
show ip dhcp detailed statistics
Command:
show ip dhcp detailed statistics { server | client | snooping |
relay | normal-forward | combined } [ interface ( <port_type>
[ <port_list> ] ) ]
show Show running system information
ip Internet Protocol
dhcp Dynamic Host Configuration Protocol
detailed DHCP server
statistics Traffic statistics
client DHCP client
combined Show all DHCP related statistics
normal-forward
relay DHCP relay
server DHCP server
snooping DHCP snooping
interface arp inspection entry interface config
Default:
N/A
Usage Guide:
To display the DHCP detailed statistics.
Example:
To display the DHCP detailed statistics (Client) for GigabitEthernet 1/1.
Switch # show ip dhcp detailed statistics client interface
GigabitEthernet 1/1
GigabitEthernet 1/1 Statistics:
-------------------------------
Rx Discover:
Tx Discover:
Rx Offer:
Tx Offer:
Rx Request:
Tx Request:
Rx Decline:
Tx Decline:
Rx ACK:
Tx ACK:
260
DHCP normal L2 or L3 forward
0
0
0
0
0
0
0
0
0
0
NS4702-24P-4X Managed Switch Command Guide