Interlogix NS4702-24P-4X Command Manual page 221

Default:
Disabled
Usage Guide:
To enable the Restricted Role of CIST
Example:
To enable the Restricted Role of CIST
Switch# configure terminal
Switch (config)# snmp-server host IFS
Switch (config-snmps-host)# spanning-tree restricted-role
spanning-tree restricted-tcn
Command:
spanning-tree restricted-tcn
spanning-tree
restricted-tcn
Default:
Disabled
Usage Guide:
To enable the Restricted TCN of CIST
Example:
To enable the Restricted TCN of CIST
Switch# configure terminal
(config)# spanning-tree aggregation
(config-stp-aggr)# spanning-tree restricted-tcn
switchport vlan mapping
Command:
switchport vlan mapping <group> <vlan_list>
<translation_vlan>
switchport Set switching mode characteristics
vlan vlan - Vlan translation
mapping Add VLAN translation entry into a group
<group id : 1-29>
<vlan_list> VLAN list
< translation_vlan >
Default:
None
Usage Guide:
To configure the VLAN Translation
Example:
To enable the VLAN Translation (below table)
NS4702-24P-4X Managed Switch Command Guide
Spanning Tree protocol
Restrict topology change notifications
Group id
translation VLAN ID
Chapter 4: Commands for CLI configuration
219