Interlogix NS4702-24P-4X Command Manual page 204

Chapter 4: Commands for CLI configuration
Usage Guide:
To configure the Weighted Random Early Detection
Example:
To configure the Weighted Random Early Detection (below table)
Switch# configure terminal
Switch (config)# qos wred queue 1 min-th 2 mdp-1 3 mdp-2 4
mdp-3 5
radius-server attribute 32
Command:
radius-server attribute 32 <Id : line1-253>
radius-server
32 NAS-Identifier
Default:
None
Usage Guide:
To configure the NAS-Identifier
Example:
To configure the NAS-Identifier (IFS)
Switch# configure terminal
Switch (config)# radius-server attribute 32 IFS
radius-server attribute 4
Command:
radius-server attribute 4 <Ipv4 : ipv4_ucast>
radius-server
4 NAS-IP-Address
Default:
None
Usage Guide:
To configure the NAS-IP-Address
Example:
To configure the NAS-IP-Address (7.7.7.7)
202
Configure RADIUS
Configure RADIUS
NS4702-24P-4X Managed Switch Command Guide