Interlogix NS4702-24P-4X Command Manual page 205

Switch# configure terminal
Switch (config)# radius-server attribute 4 7.7.7.7
radius-server attribute 95
Command:
radius-server attribute 95 <Ipv6 : ipv6_ucast>
radius-server
95 NAS-IPv6-Address
Default:
None
Usage Guide:
To configure the NAS-IPv6-Address
Example:
To configure the NAS-IPv6-Address (2001::7788)
Switch# configure terminal
Switch (config)# radius-server attribute 95 2001::7788
radius-server deadtime
Command:
radius-server deadtime <Minutes : 1-1440>
radius-server
deadtime Time to stop using a RADIUS server that doesn't respond
<Minutes : 1-1440>
Default:
0
Usage Guide:
To configure the Deadtime of Radius-Server
Example:
To configure the Deadtime (15) of Radius-Server
Switch# configure terminal
Switch (config)# radius-server deadtime 15
radius-server host
Command:
radius-server host <host_name> [ auth-port <auth_port> ]
[ acct-port <acct_port> ] [ timeout <seconds> ] [ retransmit
<retries> ] [ key <key> ]
radius-server
host Specify a RADIUS server
NS4702-24P-4X Managed Switch Command Guide
Configure RADIUS
Configure RADIUS
Time in minutes
Configure RADIUS
Chapter 4: Commands for CLI configuration
203