Interlogix NS4702-24P-4X Command Manual page 94

Chapter 4: Commands for CLI configuration
qos Quality of Service
storm Storm policer
broadcast Police broadcast frames
<Rate : 100-13200000>
fps Rate is fps
Default:
500
Usage Guide:
To configure Broadcast Frames Storm Control Rate of QoS for specific interface
Example:
To configure Broadcast Frames Storm Control Rate (999 fps) of QoS for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos storm broadcast 999 fps
qos storm unicast
Command:
qos storm unicast <Rate : 100-13200000> [fps]
qos Quality of Service
storm Storm policer
unicast Police unicast frames
<Rate : 100-13200000>
fps Rate is fps
Default:
500
Usage Guide:
To configure Unicast Frames Storm Control Rate of QoS for specific interface
Example:
To configure Unicast Frames Storm Control Rate (999 Kbps) of QoS for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos storm unicast 999
qos storm unknown
Command:
qos storm unknown <Rate : 100-13200000> [fps]
qos Quality of Service
storm Storm policer
unknown Police unknown (flooded) frames
<Rate : 100-13200000>
fps Rate is fps
Default:
500
92
Policer rate (default kbps)
Policer rate (default kbps)
Policer rate (default kbps)
NS4702-24P-4X Managed Switch Command Guide