Interlogix NS4702-24P-4X Command Manual page 287

show ntp status
Command:
show ntp status
show Show running system information
ntp Configure NTP
status status
Default:
N/A
Usage Guide:
To display the NTP Server information.
Example:
To display the NTP Server information.
Switch # show ntp status
NTP Mode : enabled
Idx Server IP host address (a.b.c.d) or a host name string
--- ------------------------------------------------------
1 192.168.0.44
2
3
4
5
show platform phy
Command:
show platform phy [ interface ( <port_type>
[ <port_type_list> ] ) ]
show Show running system information
platform Platform specific information
phy PHYs' information
interface Search by port
Default:
N/A
Usage Guide:
To display the PHY information.
Example:
To display the PHY information for GigabitEthernet 1/1.
Switch # show platform phy interface GigabitEthernet 1/1
Port API Inst WAN/LAN/1G Mode
---- ---------
1 Default
NS4702-24P-4X Managed Switch Command Guide
--------- ----
1G ANEG
Chapter 4: Commands for CLI configuration
Duplex Speed
------ ----- ----
- - No
Link
285