Interlogix NS4702-24P-4X Command Manual page 156

Chapter 4: Commands for CLI configuration
Default:
4
Usage Guide:
To configure frame transmission time of LLDP
Example:
To configure frame transmission time (6) of LLDP
Switch# configure terminal
Switch (config)# lldp med fast 6
lldp med location-tlv altitude
Command:
lldp med location-tlv altitude [floors <Meters or floors>] |
[meters <Meters or floors>]
lldp LLDP configurations.
med Media Endpoint Discovery
location-tlv
altitude Altitude parameter
floors Specify the altitude in floor.
<Meters or floors> Altitude value.
meters Specify the altitude in meters.
Default:
0
Usage Guide:
To configure altitude of LLDP-MED
Example:
To configure altitude (Floors 5) of LLDP-MED
Switch# configure terminal
Switch (config)# lldp med location-tlv altitude floors 5
lldp med location-tlv elin-addr
Command:
lldp med location-tlv elin-addr <ELIN number>
lldp LLDP configurations.
med Media Endpoint Discovery
location-tlv LLDP-MED Location Type Length Value parameter
elin-addr Emergency Location Identification Number, (e.g. E911 and others),
<ELIN number>
Default:
0
Usage Guide:
To configure Emergency Location Identification Number of LLDP-MED
154
LLDP-MED Location Type Length Value parameter
such as defined by TIA or NENA.
ELIN value
NS4702-24P-4X Managed Switch Command Guide