Interlogix NS4702-24P-4X Command Manual page 140

Chapter 4: Commands for CLI configuration
ip route
Command:
ip route <ipv4_addr> <ipv4_netmask> <ipv4_gateway>
ip Internet Protocol
route Add IP route
<ipv4_addr>
<ipv4_netmask>
<ipv4_gateway>
Default:
None
Usage Guide:
To configure static route
Example:
To configure static route as below table.
Switch# configure terminal
Switch (config)# ip route 192.168.1.0 255.255.255.0 192.168.0.1
ip routing
Command:
ip routing
ip Internet Protocol
routing Enable routing for IPv4 and IPv6
Default:
None
Usage Guide:
To enable IP routing
Example:
To enable IP routing
Switch# configure terminal
Switch (config)# ip routing
ip source binding interface
Command:
ip source binding interface 10GigabitEthernet |
GigabitEthernet <port_type_id> <ipv4_ucast>
<ipv4_netmask>
ip Internet Protocol
source source command
138
Network
Netmask
Gateway
NS4702-24P-4X Managed Switch Command Guide