Interlogix NS4702-24P-4X Command Manual page 271

show ip route
Command:
show ip route
show Show running system information
ip Internet Protocol
route Display the current ip routing table
Default:
N/A
Usage Guide:
To display the IP Routing table.
Example:
To display the IP Routing table.
Switch # show ip route
11.11.11.0/24 via 192.168.0.14 <UP GATEWAY HW_RT>
127.0.0.1/32 via 127.0.0.1 <UP HOST>
192.168.0.0/24 via VLAN1 <UP HW_RT>
224.0.0.0/4 via 127.0.0.1 <UP>
show ip source binding
Command:
show ip source binding [ dhcp-snooping | static ] [ interface
( <port_type> [ <port_type_list> ] ) ]
show Show running system information
ip Internet Protocol
source source command
binding ip source binding
dhcp-snooping
interface ip source binding interface config
static setting from static entries
Default:
N/A
Usage Guide:
To display the Static IP Source Guard Table.
Example:
To display the Static IP Source Guard Table.
Switch # show ip source binding interface GigabitEthernet 1/1
Type Port
---- ----
Static GigabitEthernet 1/1
255.255.255.0
NS4702-24P-4X Managed Switch Command Guide
learn from dhcp snooping
VLAN IP Address
----
Chapter 4: Commands for CLI configuration
IP Mask
---------- -------
1 192.168.0.22
269